Installing Tuxedo10gR3

[varun@localhost Tuxedo10gR3_x86_64]$ ./tuxedo10gR3_64_Linux_01_x86.bin -i console
Preparing to install…
Extracting the JRE from the installer archive…
Unpacking the JRE…
Extracting the installation resources from the installer archive…
Configuring the installer for this system’s environment…

Launching installer…

Preparing CONSOLE Mode Installation…

===============================================================================
Choose Locale…
—————-

->1- English

CHOOSE LOCALE BY NUMBER:
===============================================================================
Tuxedo 10gR3                      (created with InstallAnywhere by Macrovision)
——————————————————————————-

===============================================================================
Introduction
————

InstallAnywhere will guide you through the Tuxedo 10gR3 installation.

It is strongly recommended that you quit all programs before continuing with
this installation.

Enter “next’ to proceed to the next screen. Enter “back” to modify the previous
screen.

You may cancel this installation at any time by typing “quit”.

WARNING: “Quitting” creates an incomplete  Tuxedo 10gR3 installation.You must
re-install  Tuxedo 10gR3. For more information, see “Preparing to Install the
Oracle Tuxedo System” in the  Tuxedo 10gR3 Installation Guide.

PRESS <ENTER> TO CONTINUE:

===============================================================================
Choose Install Set
——————

Please choose the Install Set to be installed by this installer.

->1- Full Install
2- Server Install
3- Full Client Install
4- Jolt Client Install
5- ATMI Client Install
6- CORBA Client Install

7- Customize…

ENTER THE NUMBER FOR THE INSTALL SET, OR PRESS <ENTER> TO ACCEPT THE DEFAULT
:

===============================================================================
Choose Oracle Home
——————

1- Create new Oracle Home
2- Use existing Oracle Home

Enter a number: 1
Specify a new Oracle Home directory: /varun/tuxedohome

===============================================================================
Choose Product Directory
————————

1- Modify Current Selection (/varun/tuxedohome/tuxedo10gR3)
2- Use Current Selection (/varun/tuxedohome/tuxedo10gR3)

Enter a number: 1
Specify Product Installation Directory: /varun/tuxedohome/
Install Samples (Y/N): Y
1- Modify Current Selection (/varun/tuxedohome)
2- Use Current Selection (/varun/tuxedohome)

Enter a number: 2
Install Samples (Y/N): Y

===============================================================================
Pre-Installation Summary
————————

Please Review the Following Before Continuing:

Product Name:
Tuxedo 10gR3

Install Folder:
/varun/tuxedohome

Link Folder:
/home/varun

Disk Space Information (for Installation Target):
Required:  195,536,693 bytes
Available: 52,005,883,904 bytes

PRESS <ENTER> TO CONTINUE:

===============================================================================
Ready To Install
—————-

InstallAnywhere is now ready to install Tuxedo 10gR3 onto your system at the
following location:

/varun/tuxedohome

PRESS <ENTER> TO INSTALL:

===============================================================================
Installing…
————-

[==================|==================|==================|==================]
[——————|——————|——————|——————]

===============================================================================
Configure tlisten Service
————————-

Password:
Verify Password:
Password Accepted! Press “Enter” to continue.

===============================================================================
SSL Installation Choice.
————————

Would you like to install SSL Support?

->1- Yes
2- No

ENTER THE NUMBER FOR YOUR CHOICE, OR PRESS <ENTER> TO ACCEPT THE DEFAULT:
: 2

===============================================================================
Installation Complete
———————

Congratulations. Tuxedo 10gR3 has been successfully installed to:

/varun/tuxedohome

PRESS <ENTER> TO EXIT THE INSTALLER:
[varun@localhost Tuxedo10gR3_x86_64]$

Installing Weblogic server(10.3.4)

If you are using jar file please set the java environment variable before installing weblogic server

 

[varun@localhost softwares]$ $JAVA_HOME/bin/java -jar ./wls1034_generic.jar -mode=console

Extracting 0%……………………………………………………………………………………….100%

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Welcome:
——–

This installer will guide you through the installation of WebLogic 10.3.4.0.
Type “Next” or enter to proceed to the next prompt.  If you want to change data entered previously, type “Previous”.  You may quit the installer at any time by typing “Exit”.

Enter [Exit][Next]>

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Choose Middleware Home Directory:
———————————

“Middleware Home” = [Enter new value or use default
“/home/varun/Oracle/Middleware”]

Enter new Middleware Home OR [Exit][Previous][Next]> /varun/weblogichome

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Choose Middleware Home Directory:
———————————

“Middleware Home” = [/varun/weblogichome]

Use above value or select another option:
1 – Enter new Middleware Home
2 – Change to default [/home/varun/Oracle/Middleware]

Enter option number to select OR [Exit][Previous][Next]>

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Register for Security Updates:
——————————

Provide your email address for security updates and  to initiate configuration manager.

1|Email:[]
2|Support Password:[]
3|Receive Security Update:[Yes]

Enter index number to select OR [Exit][Previous][Next]> 3

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Register for Security Updates:
——————————

Provide your email address for security updates and  to initiate configuration manager.

“Receive Security Update:” = [Enter new value or use default “Yes”]

Enter [Yes][No]? No

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Register for Security Updates:
——————————

Provide your email address for security updates and  to initiate configuration manager.

“Receive Security Update:” = [Enter new value or use default “Yes”]

** Do you wish to bypass initiation of the configuration manager and
**  remain uninformed of critical security issues in your configuration?

Enter [Yes][No]? Yes

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Register for Security Updates:
——————————

Provide your email address for security updates and  to initiate configuration manager.

1|Email:[]
2|Support Password:[]
3|Receive Security Update:[No]

Enter index number to select OR [Exit][Previous][Next]>

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Register for Security Updates:
——————————

Provide your email address for security updates and  to initiate configuration manager.

1|Email:[]
2|Support Password:[]
3|Receive Security Update:[No]

Enter index number to select OR [Exit][Previous][Next]>

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Choose Install Type:
——————–

Select the type of installation you wish to perform.

->1|Typical
|  Install the following product(s) and component(s):
| – WebLogic Server
| – Oracle Coherence

2|Custom
|  Choose software products and components to install and perform optional
|configuration.

Enter index number to select OR [Exit][Previous][Next]>

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

JDK Selection (Any * indicates Oracle Supplied VM):
—————————————————

JDK(s) chosen will be installed.  Defaults will be used in script string-substitution if installed.

1|Add Local Jdk
2|/varun/javahome[x]

*Estimated size of installation:  663.9 MB

Enter 1 to add or >= 2 to toggle selection  OR [Exit][Previous][Next]>

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Choose Product Installation Directories:
—————————————-

Middleware Home Directory: [/varun/weblogichome]

Product Installation Directories:

1|WebLogic Server: [/varun/weblogichome/wlserver_10.3]
2|Oracle Coherence: [/varun/weblogichome/coherence_3.6]

Enter index number to select OR [Exit][Previous][Next]>

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

The following Products and JDKs will be installed:
————————————————–

WebLogic Platform 10.3.4.0
|_____WebLogic Server
|    |_____Core Application Server
|    |_____Administration Console
|    |_____Configuration Wizard and Upgrade Framework
|    |_____Web 2.0 HTTP Pub-Sub Server
|    |_____WebLogic SCA
|    |_____WebLogic JDBC Drivers
|    |_____Third Party JDBC Drivers
|    |_____WebLogic Server Clients
|    |_____WebLogic Web Server Plugins
|    |_____UDDI and Xquery Support
|    |_____Evaluation Database
|_____Oracle Coherence
|_____Coherence Product Files

*Estimated size of installation: 664.0 MB

Enter [Exit][Previous][Next]>
Mar 29, 2012 10:28:03 PM java.util.prefs.FileSystemPreferences$2 run
INFO: Created user preferences directory.

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Installing files..

0%          25%          50%          75%          100%
[————|————|————|————]
[***************************************************]

Performing String Substitutions…

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Configuring OCM…

0%          25%          50%          75%          100%
[————|————|————|————]
[***************************************************]

Creating Domains…

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Installation Complete

Congratulations! Installation is complete.

Press [Enter] to continue or type [Exit]>

<——————– Oracle Installer – WebLogic 10.3.4.0 ——————->

Clean up process in progress …
[varun@localhost softwares]$

Installing Peopletools 8.52

NOTE

Peoplesoft supports only 64bit processor

peoplesoft peopletools 8.52 supports weblogic server 10.3.4 and above versions

[varun@localhost peopletools8.52]$ ls
Disk1  Disk2  Disk3  V27724-01.zip  V27725-01.zip  V27726-01.zip
[varun@localhost peopletools8.52]$ cd Disk1
[varun@localhost Disk1]$ ls -ltr
total 24
-rwxrw-r– 1 varun varun 1690 Jul 12  2011 setup.bat
-rwxrw-r– 1 varun varun 3916 Jul 12  2011 setup.sh
drwxrwxr-x 2 varun varun 4096 Aug 29  2011 InstData

After installing add the environmental  variable  to  bash_profile of user or in profile script

export PS_HOME=/varun/peoplesoft

export PS_CFG_HOME=$PS_HOME

. $PS_HOME/psconfig.sh

[varun@localhost Disk1]$ ./setup.sh
Setting temporary directory /tmp/IA.4936
Executing setup.linux   -DCOMP_NAME=localhost.localdomain -DPS_UMASK=0002
Preparing to install…
Extracting the JRE from the installer archive…
Unpacking the JRE…
Extracting the installation resources from the installer archive…
Configuring the installer for this system’s environment…

Launching installer…

Preparing CONSOLE Mode Installation…

===============================================================================
PeopleTools                                      (created with InstallAnywhere)
——————————————————————————-

===============================================================================
Welcome
——-

InstallAnywhere will guide you through the installation of PeopleTools 8.52.

PRESS <ENTER> TO CONTINUE:

===============================================================================

Please enter your PeopleSoft license code []: zm7ky3w41m044u863q67oke1ms7t1f2

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] :

===============================================================================

Please select the Oracle database character set:

->1- Non-Unicode Database
2- Unicode Database

To select an item enter its number, or 0 when you are finished [0] :

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] :

===============================================================================

For Oracle please select the products to install:

->1- PeopleSoft Application Server
->2- PeopleSoft Batch Server
->3- PeopleSoft Database Server
->4- PeopleSoft Web Server

To select an item enter its number, or 0 when you are finished [0] :

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] :

===============================================================================

Please enter an installation location or press <ENTER> to accept the default
(DEFAULT: /opt/PT8.52): /varun/peoplesoft

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] :

===============================================================================

Provide your email address to be informed on security issues, install the
product and initiate configuration manager. Easier for you if you use your My
Oracle Support Email address/User Name. Visit
http://www.oracle.com/support/policies.html for details
Email address/ User Name (DEFAULT: ):
You have not provided an email address
Do you wish to remain uninformed of critical security issues in your
configuration.        (Y/N): Y

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] :

===============================================================================

Please enter the hub machine name: [PSEMHUB]:

Please enter the hub port number: [80]:

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] :

===============================================================================

Please select the features to install:

->1- PeopleTools
->2- PeopleTools System Database

To select an item enter its number, or 0 when you are finished [0] :

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] :

===============================================================================

Pre-Install Summary

Please review the following before continuing:

PeopleTools  will be installed in the following location: /varun/peoplesoft

with the following features:
PeopleTools
PeopleTools System Database

The following PeopleSoft Servers were selected by you:
PeopleSoft Application Server
PeopleSoft Batch Server
PeopleSoft Database Server
PeopleSoft Web Server

Database type: Oracle

Environment Hub Configuration:

Hub machine name: PSEMHUB

Hub port number: 80

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] :

===============================================================================
Installing…
————-

[==================|==================|==================|==================]
[——————|——————|——————|——————]

===============================================================================
Installation Complete
———————

Congratulations. PeopleTools has been successfully installed to:

/varun/peoplesoft

PRESS <ENTER> TO EXIT THE INSTALLER:
[varun@localhost Disk1]$

Installing JRocket update29

Check the file permission  before executing , if it doesn’t have execute permission.

Execute the below command

[varun@localhost jrockit-jdk(1.6.0_29)_x86_64]$ chmod u+x jrockit-jdk1.6.0_29-R28.2.2-4.1.0-linux-x64.bin

[varun@localhost jrockit-jdk(1.6.0_29)_x86_64]$ ls -ltr
total 121632
-rwxrw-r– 1 varun varun 124416620 Jan 19 18:21 jrockit–jdk1.6.0_29-R28.2.2-4.1.0-linux-x64.bin

 

After installing add the environmental  variable  to  bash_profile of user or in profile script

export JAVA_HOME=/installtion directory/

export PATH=$JAVA_HOME/bin:$PATH

 

 

 

 

[varun@localhost jrockit-jdk(1.6.0_29)_x86_64]$ ./jrockit-jdk1.6.0_29-R28.2.2-4.                                                               1.0-linux-x64.bin
Extracting 0%……………………………………………………………………………………….100%
Unable to instantiate GUI, defaulting to console mode.

<—————————– Oracle JRockit Installer – Oracle JRockit JDK R28.2.2 for Java SE 6 with JRMC 4.1 —————————->

Welcome:
——–
This installer will guide you through the installation of Oracle JRockit JDK R28.2.2 for Java SE 6 with JRMC 4.1. Type “Next” or enter to
proceed to the next prompt.  If you want to change data entered previously, type “Previous”.  You may quit the installer at any time by typing “Exit”.

Enter [Exit][Next]>

<—————————– Oracle JRockit Installer – Oracle JRockit JDK R28.2.2 for Java SE 6 with JRMC 4.1 —————————->

Choose Product Installation Directory:
————————————–

“Product Installation Directory” = [Enter new value or use default “/home/varun/jrockit-jdk1.6.0_29-R28.2.2-4.1.0”]

Enter new Product Installation Directory OR [Exit][Previous][Next]> /varun/javahome/

<—————————– Oracle JRockit Installer – Oracle JRockit JDK R28.2.2 for Java SE 6 with JRMC 4.1 —————————->

Choose Product Installation Directory:
————————————–

“Product Installation Directory” = [/varun/javahome/]

Use above value or select another option:
1 – Enter new Product Installation Directory
2 – Change to default [/home/varun/jrockit-jdk1.6.0_29-R28.2.2-4.1.0]

Enter option number to select OR [Exit][Previous][Next]>

<—————————– Oracle JRockit Installer – Oracle JRockit JDK R28.2.2 for Java SE 6 with JRMC 4.1 —————————->

Optional Components 1

Do you want to install Demos and Samples?

1 – Yes, install Demos and Samples.
->2 – No, do not install.

Enter a number or [Exit][Previous][Next]>

<—————————– Oracle JRockit Installer – Oracle JRockit JDK R28.2.2 for Java SE 6 with JRMC 4.1 —————————->

Optional Components 2

Do you want to install Source Code?

1 – Yes, install Source Code.
->2 – No, do not install.

Enter a number or [Exit][Previous][Next]>

<—————————– Oracle JRockit Installer – Oracle JRockit JDK R28.2.2 for Java SE 6 with JRMC 4.1 —————————->

Installing JDK to /varun/javahome/…

0%          25%          50%          75%          100%
[————|————|————|————]
[***************************************************]

<—————————– Oracle JRockit Installer – Oracle JRockit JDK R28.2.2 for Java SE 6 with JRMC 4.1 —————————->

Installing JRE to /varun/javahome//jre…

0%          25%          50%          75%          100%
[————|————|————|————]
[***************************************************]

<—————————– Oracle JRockit Installer – Oracle JRockit JDK R28.2.2 for Java SE 6 with JRMC 4.1 —————————->

Installation Complete

Congratulations! Oracle JRockit JDK R28.2.2 for Java SE 6 with JRMC 4.1 has been successfully installed to /varun/javahome/.

Press [Enter] to continue or type [Exit]>

<—————————– Oracle JRockit Installer – Oracle JRockit JDK R28.2.2 for Java SE 6 with JRMC 4.1 —————————->

Clean up process in progress …